Door & window repair, statewide
French Door Repair
When the two halves stop meeting in the middle
French doors are heavy, hung on hinges, and expected to meet each other perfectly down a vertical line. When one side drops even slightly, the pair stops closing, the latch misses, and daylight appears down the middle.

The hardest door in the house to keep aligned
A French pair has to do something no single door does: two heavy, mostly glass slabs have to meet each other along a full-height line and seal there. There is no jamb in the middle to stop them, only an astragal and a latch, so any sag on either side shows up immediately as a gap you can see through.
Add Arkansas humidity, which swells the slabs, and settlement, which racks the opening, and you have a door that needs adjusting more often than any other in the house.
The good news is that almost all of it is adjustment and hardware. Sagging is fixable, latches can be brought back into register, and multipoint mechanisms can be repaired or replaced without touching the doors themselves.
If you can see daylight down the middle, one slab has dropped. That is adjustable.

What we repair on French doors
Hinged pairs, interior and exterior, including glazed patio pairs.
Sagging and dropped slabs
Hinges reinforced, screws anchored into framing and the slab brought back up so the pair meets cleanly.
Doors that will not meet
Alignment of the pair, the astragal and the closing line so the gap closes evenly top to bottom.
Multipoint locks
Mechanisms that will not throw, handles that lift without engaging, and keepers that no longer line up.
Glass panes
Cracked and fogged panes in glazed French doors replaced, in tempered glass where required.
Weatherstrip and astragal seals
The seals along the meeting edge, which is where French doors leak air and water first.
Threshold and drag
Doors catching on the threshold, and adjustable sills reset to seal without binding.
Why French doors drift out here
Weight, humidity and movement combine badly on a hinged pair.
Humidity swells both slabs
Two swelling slabs meeting in the middle means twice the movement at the closing line. That is why a French pair that shut perfectly in March binds by July.
Weight on the hinges
Mostly-glass slabs are heavy and they hang on screws in jamb wood. Damp softens that wood, screws lose grip, and the door drops.
Openings racking
Ground movement under Arkansas houses pulls openings slightly out of square, and a pair of doors shows that far sooner than a single door does.
Why French doors need a specialist
Getting a pair to meet, seal and latch is fine adjustment work.
Alignment is the whole job
Anyone can hang a door. Getting a pair to close evenly and stay that way through an Arkansas year is the skill.
We repair multipoint hardware
Including on older and imported systems, rather than declaring the door unrepairable.
Anchored properly
Long screws into structural framing so the slab does not drop again next summer.
Available any hour
A French pair that will not latch is a security problem, and we answer 24/7.
Three steps, no runaround
Tell us what it is doing
Whether it binds at the top, drags at the bottom, or simply will not latch tells us where the sag is.
We diagnose on site
Hinges, slabs, astragal, latch and threshold all checked, then a firm price.
We repair it
Most alignment and hardware work finishes the same visit. Glass comes back once cut.
We are a mobile service covering the whole state. Pick your city below for local details, or call us and we will come to you.
French Door Repair Across Arkansas
French door questions
There is a gap between my French doors. Can that be closed up?
Yes. It nearly always means one slab has dropped on its hinges. Reinforcing the hinges and bringing the slab back up closes the line.
The handle lifts but the lock does not engage.
That is a multipoint mechanism or a keeper alignment problem. Both are repairable, and the doors themselves do not need replacing.
My French doors drag on the threshold in summer.
Humidity has swelled the slabs. We adjust the doors and, where fitted, reset the adjustable sill so they seal without binding.
Can you replace a cracked pane in a French door?
Yes, cut to size and in tempered safety glass where code requires it.
Are French doors secure?
They can be, but they need the hardware to be right. We reinforce strikes and anchor into framing rather than just the jamb, which makes a real difference.
Other repairs we handle
Doors and windows are all we do, so whatever has failed, it is probably on this list.
Get your French doors meeting again
Free estimates anywhere in Arkansas, at any hour.
(501) 299-9017